The Occupational Safety and Health Administration (OSHA) published a final rule on Occupational Exposure to Beryllium in the Federal Register on January 9, 2017. The final rule reduces the permissible exposure limit (PEL) for beryllium to 0.2 μg/m3, averaged over 8-hours. The previous PEL for beryllium, established more than 40 years ago, was 2.0 μg/m3. The rule also establishes a new short term exposure limit for beryllium of 2.0 μg/m3, over a 15-minute sampling period.
As we discussed previously on this blog, OSHA proposed this rule on August 7, 2015 and took extensive public comment before issuing this final version. OSHA estimates that approximately 62,000 workers are exposed to beryllium in their workplaces and that the rule will save almost 100 lives from beryllium-related diseases and prevent 46 new cases of chronic beryllium disease each year, once the effects of the rule are fully realized.
In addition to the PEL reductions, the final rule requires employers to use engineering and work practice controls (such as ventilation and change rooms) to limit worker exposure to beryllium; provide respirators when controls cannot adequately limit exposure; limit worker access to high-exposure areas; develop a written exposure control plan; and train workers on beryllium hazards. The rule also provides for medical exams to monitor exposed workers and medical removal protection benefits to workers identified with a beryllium-related disease.
The rule will take effect on March 10, 2017. Employers will have one year (until March 12, 2018) to comply with most of the requirements, two years (until March 11, 2019) to provide any required change rooms and showers, and three years (until March 10, 2020) to implement engineering controls.
More information on the Occupational Exposure to Beryllium rule is available on the OSHA website.